Paced flows
A coordinated fleet splits up the shuttle runs, including offline: a network outage does not stop your supply. Triggering follows your pace, by app, station buttons or a programming interface linked to your management system.
INDUSTRY: INDUSTRIAL PRODUCTION
The line kept supplied, without tying up a forklift operator
The robot is an autonomous pallet truck that takes over repetitive line-side handling: delivering components to the workstation, removing finished goods, running regular shuttles between workshops. Meanwhile, your teams focus on tasks that require a human touch.
✓ Free pre-assessment, no commitment | +700 sites trust the Easy To group
LINE-SIDE
Components arriving, finished goods leaving
In most factories, a forklift operator spends part of their time shuttling between the receiving area, workstations and shipping. These runs represent hours of repetitive handling every day. The robot is designed precisely to take them over.
SUPPLYING THE LINES
Workstations supplied without breaking the flow
On a paced line, any supply interruption means a production stop. The autonomous pallet truck runs continuous shuttles between your receiving area and your workstations: it engages a pallet in 20 s, carries up to 2,000 kg and is triggered by app, station buttons or your programming interface, at the pace of your production. When a pallet sits offset or turned, it corrects its pickup on its own: up to 15 cm of offset and 15° of rotation, with no human intervention.
REMOVING FINISHED GOODS
Finished goods removed at the pace of production
At the end of the line, the autonomous pallet truck picks up the pallet at 90° in a 2 m aisle, sets it down leaving 15 cm between pallets, and moves at 1.2 m/s loaded, 1.6 m/s empty. Its 200 mm lift matches a defined use: moving your pallets at ground level, from the workstation to the shipping area. It is a pallet truck, not a forklift: it does not stack at height. This defined scope contributes to its reliability in repetitive shuttle work.
INDUSTRY CONSTRAINTS
Four shop-floor constraints, four technical answers
Aisles shared with pedestrians
The robot moves among your operators: it perceives its surroundings at 360°, slows, stops and steers around obstacles. This behavior, critical to operations, is detailed below.
Thresholds between workshops
A doorway, an expansion joint, a ramp: the robot crosses thresholds up to 10 mm, gaps up to 35 mm and loaded slopes up to 3° (about 5%), 8° empty. The pre-assessment verdict tells you which of these to measure at your site.
Mixed pallet types
Three-runner pallets, perimeter base, non-standard supports: the robot's perception system identifies the support before engaging it. Two fork widths are available, 620 mm or 550 mm, based on your pallets and aisles.
SAFETY
Designed to work alongside your teams
360° PERCEPTION
See, stop, steer around
The robot combines a 3D LiDAR and cameras, in dual SLAM: it localizes itself and perceives its surroundings simultaneously, across 360°. When an operator crosses the aisle, the robot slows then stops. If the obstacle remains, it steers around it when a safe path exists; otherwise, it waits. Your teams can also take back control at any time: manual mode turns the robot into a standard pallet truck, to handle the unexpected without interrupting the shop floor.
SPEC SHEET
The numbers that matter on the shop floor
Load and pace
Maximum load2,000 kg
Loaded speed1.2 m/s
Empty speed1.6 m/s
Pallet engagement20 s
Pickup correctionOffset up to 15 cm, rotation up to 15°
Size and forks
Dimensions1,585 × 910 × 1,870 mm
Lift200 mm (forks lowered: 80 mm)
Forks620 mm (Standard MPID01-M) or 550 mm (Narrow MPID01-N)
90° pickupIn a 2 m aisle
Space between pallets15 cm
Crossing between workshops
Thresholds10 mm
Gaps and joints35 mm
Loaded slope3° (about 5%)
Empty slope8°
Battery life and navigation
Battery life, empty12 h
Battery life, fully loaded6 h
ChargingAbout 2 h (200-240 V)
Navigation3D LiDAR + cameras (dual SLAM)
FleetCoordinated, including offline
One clarification: 6 hours of battery life at full load does not mean 6 hours of continuous work at 2 tonnes. Actual productivity on your flows will be measured during the first wave of demonstrations, once distribution opens. The detailed robot spec sheet is on the autonomous pallet truck page.
FREE PRE-ASSESSMENT
What the pre-assessment checks from your answers
Our brand is young: we do not lead with references or existing deployments. Proof measured at your site, on your flows and your pallets, will come during the first wave of demonstrations, once distribution opens. In the meantime, the free pre-assessment described on the site assessment page is based on your own answers: it reviews the points that determine the project's success, and the written verdict arrives within 48 business hours.
Your thresholds
The autonomous pallet truck crosses up to 10 mm: the verdict tells you which doorways to measure, workshop by workshop.
Your floors
Gaps, expansion joints, covered gutters: the limit is 35 mm, and the verdict indicates which to check along the shuttles' actual path.
Your ramps
The limit is 3° loaded (about 5%): the verdict flags every gradient to check between your workshops.
Your aisles
A 90° pickup requires 2 m: the verdict tells you where to check this width with a tape measure, at the actual pickup and drop-off points, not on a floor plan.
Your pallets
Three runners, perimeter base, non-standard supports: the robot will be tried on your pallets as they are, during the first wave of demonstrations.
Your actual pace
Number of shuttles, cycle time, observed battery life: the demonstration will measure, once distribution opens, what the robot actually achieves on your flow.
"No site modification" does not mean "no integration": if your shuttles cross automatic doors or use an elevator, optional integrations exist and we define them at this stage. The full process is described on the How it works page.
THE OFFER
Two plans, one regional contact
Full service
The robot, maintenance, parts and training are combined into a single all-inclusive monthly fee: the expense stays an operating cost, with no capital outlay.
Discover full service
Purchase + maintenance contract
The robot joins your assets; the maintenance contract secures its availability over time.
Discover purchase with maintenance
Pricing will be set after the demonstration, once distribution opens, based on measurements taken at your site. You are followed by a single regional contact, from pre-assessment to after-sales service: the same network as easytoclean, with 12 regional contacts.
Near you
A single contact, from pre-assessment to after-sales service
Thirteen people across mainland France; the one in your region follows you from pre-assessment to after-sales service. Click a portrait to write to them.
The usual pattern
- A salesperson sells the machine
- A project manager organizes delivery
- A vendor takes over after-sales service
- A technician discovers your site on the day it breaks down
Four contacts, and the last one knows neither your floors, your hours, nor what was agreed at the start.
At Easy to Carry
A single contact
From the first meeting to routine maintenance
They measure your spaces and price the project
They install the robot and map your areas
They train your teams
They come back for upkeep and adjustments
The person who works on your machine is the one who saw your site before deployment. Nothing to re-explain.
- 12 regionsAll of mainland France except Corsica: we are established in every region.
- 72 hThe contractual deadline for replacing a machine down due to a breakdown.
Your pallets move on their own? Your floors can be cleaned autonomously too. By the same group: over 700 sites supported across France, with the same regional contact.
Your line, without waiting for a pallet
Distribution is opening soon in France. The pre-assessment is free and serves as the study: your aisles, thresholds and pallets are reviewed, before any commitment.